Tap the Save icon in the top right of the app.Enter your login username and password for the camera.Change the Host address to your Router's WAN IP address.You will input the Router's WAN IP address in the app next. This is typically found on your Router's status page. Locate your Router's WAN (Public) IP address, and write it down. Login to your Router and create one rule with TCP port 80 to the IP address of the camera and create another rule with port 554 also to the IP address of the camera for the following models. ), login to your Router, go to Firewall settings, go to Port Forwarding (Virtual Server) settings, and then create a rule with TCP port 80 to the IP address of your camera for the following models. To create Port Forwarding (Virtual Server) rules, from a network computer (or your mobile device when applicable), open a web browser, open the Router's configuration page (e.g. Please contact your Router manufacturer for assistance in setting up a DHCP reservation for the camera (Host) and create Port Forwarding (Virtual Server) rules using the camera's IP address and Port number. 192.168.20.120) to the camera every time, and this is normally done using the Router's DHCP reservation feature. You will want the Router to assign the same IP address (e.g. For most cases, your camera was automatically assigned an IP address by your Router and the address could change if the Router is rebooted/power cycled.Do not save the camera to the app exit/close the app. To do this, from you Router, you will need to setup Port Forwarding (Virtual Server) rules with the camera's IP address and port number. Your Router uses the IP address and Port number to allow you to view the camera's video stream anywhere as long as you have internet access. The Host number is the local network IP address of your camera, and the Port number is the HTTP communication port.
Tap the "+" sign to the right of the camera.
Launch TRENDnet IPView, and then tap Scan.Connect your mobile device to the same WiFi network that your camera is connected to.Download and install TRENDnet IPView from the Google Play Store or from the Apple App Store.
Yes, you can continue to use these cameras, but you will need to configure your Router, and use the TRENDnet IPView App. If you are not using the TRENDnet CloudView App to view these cameras, you will not be affected. After December 31, 2020, you will no longer be able to use the TRENDnet CloudView App to view these cameras' video streams.
0 kommentar(er)
